Rib Height Gage
Measure your original rib height
quickly and (parallel to the board)
for documentation, then use it as a
feeler gauge to see when
you've planed to the correct height.
Very comfortable to hold and use.
ITEM# RH06 .... $40-
Mount this jig on a table and crown your ribs
using a hand router and template guide. Just
clamp a rib in the jig using standard C- clamps
and then a quick pass with the router and it's
done. Made of tough birch plywood with metal
runners for wear resistance, 60" long.
Available in 5/16 or 7/16 crown, derived over
6 feet . . . Kit with pre-crowned
rails and Plans ITEM # RCK04…$170
PLANS ONLY . . $25